Position im NFS Digitale Fabrikation

Postdoctoral Researcher

Zugehörige Forschungsgruppe

Chair for Digital Building Technologies, ETH Zurich

NFS Publikationen

• HiRes: 3D-Printed Formwork for an Integrated Slab (2024)

  • Datum: 01.01.2024
  • Autoren: Dr. Andrei Jipa, Dr. Gearóid Lydon, Angela Yoo, Georgia Chousou, Prof. Benjamin Dillenburger, Arno Schlueter
  • Event: Design Modelling Symposium (DMS 2024)

• Sandstone and Plastic: HiRes Slab Switzerland (2024)

  • Datum: 01.01.2024
  • Autoren: Dr. Andrei Jipa, Dr. Gearóid Lydon, Angela Yoo

• Sandstone and Plastic: Smart Slab Switzerland (2024)

  • Datum: 01.01.2024
  • Autoren: Dr. Andrei Jipa

• 3D-printed formworks for glass fibre reinforced shotcrete (2023)

  • Datum: 09.05.2023
  • Autoren: Dr. Andrei Jipa, Theo Bürgin, Prof. Benjamin Dillenburger
  • Event: 18th International Glassfibre Reinforced Concrete Association Congress (GRC2023)

• Environmental stress cracking of 3D-printed polymers exposed to concrete (2022)

  • Datum: 01.10.2022
  • Autoren: Dr. Andrei Jipa, Dr. Lex Reiter, Prof. Dr. Robert Flatt, Prof. Benjamin Dillenburger
  • Bemerkungen: Thermoplastic Selection for Formwork

• Digitally fabricated ribbed concrete floor slabs: a sustainable solution for construction (2022)

  • Datum: 06.07.2022
  • Autoren: Dr. Jaime Mata Falcón, Patrick Bischof, Dr. Tobias Huber, Dr. Ana Anton, Dr. Joris Burger, Dr. Francesco Ranaudo, Dr. Andrei Jipa, Dr. Lukas Gebhard, Dr. Lex Reiter, Prof. Dr. Ena Lloret-Fritschi, Dr. Tom Van Mele, Prof. Dr. Philippe Block, Prof. Fabio Gramazio, Prof. Matthias Kohler, Prof. Benjamin Dillenburger, Dr. Timothy Wangler, Prof. Dr. Walter Kaufmann

• 3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications (2022)

  • Datum: 01.04.2022
  • Autoren: Dr. Andrei Jipa, Prof. Benjamin Dillenburger

• Free Formwork (2022)

  • Datum: 01.01.2022
  • Autoren: Dr. Andrei Jipa

• Fast Complexity: Additive Manufacturing for Bespoke Concrete Slabs (2021)

  • Datum: 01.08.2021
  • Autoren: Dr. Ana Anton, Dr. Andrei Jipa, Dr. Lex Reiter, Prof. Benjamin Dillenburger
  • Event: 40th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA 2020)

• DFAB House: A comprehensive demonstrator of digital fabrication in architecture (2020)

  • Datum: 06.04.2020
  • Autoren: Dr. Konrad Graser, Marco Baur, Dr. Aleksandra Anna Apolinarska, Prof. Dr. Kathrin Dörfler, Prof. Dr. Norman Hack, Dr. Andrei Jipa, Prof. Dr. Ena Lloret-Fritschi, Dr. Timothy Sandy, Daniel Sanz-Pont, Prof. Dr. Daniel Hall, Prof. Matthias Kohler
  • Event: Fabricate 2020 (virtual)
  • Bemerkungen: Due to the Coronavirus (COVID-19) the conference was conducted virtually.

• Fast Complexity: Additive Manufacturing for Prefabricated Concrete Slabs (2020)

  • Datum: 01.01.2020
  • Autoren: Dr. Ana Anton, Dr. Andrei Jipa, Dr. Lex Reiter, Prof. Benjamin Dillenburger
  • Event: 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2020) (virtual)
  • Bemerkungen: Due to the Corona virus (COVID-19) the conference was conducted virtually.

• Submillimeter Formwork: 3D-Printed Plastic Formwork for Concrete Elements (2020)

  • Datum: 01.01.2020
  • Autoren: Dr. Andrei Jipa, Mathias Bernhard, Prof. Benjamin Dillenburger
  • Event: TxA 78th Annual Conference and Design Expo (TxA 2017)

• Formwork Fabrication Freedom for a Concrete Canoe (2019)

  • Datum: 06.09.2019
  • Autoren: Dr. Andrei Jipa, Mathias Bernhard, Nicolas Ruffray, Dr. Timothy Wangler, Prof. Dr. Robert Flatt, Prof. Benjamin Dillenburger

• Powder Bed 3D Printing with Geopolymers (2019)

  • Datum: 01.03.2019
  • Autoren: Dr. Vera Voney, Pietro Odaglia, Dr. Gnanli Landrou, Coralie Brumaud, Dr. Andrei Jipa, Dr. Isolda Agustí Juan, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert
  • Event: 2nd RILEM Spring Convention & International Conference on Sustainable Materials, Systems and Structures (SMSS2019)

• 3D-Printed Formwork for Integrated Funicular Concrete Slabs (2019)

  • Datum: 01.01.2019
  • Autoren: Dr. Andrei Jipa, Dr. Cristian Javier Calvo Barentin, Dr. Gearóid Lydon, Dr. Matthias Rippmann, Georgia Chousou, Matteo Lomaglio, Arno Schlueter, Prof. Dr. Philippe Block, Prof. Benjamin Dillenburger
  • Event: Form and Force – Joint International Conference of IASS Symposium 2019 (60th Anniversary) and Structural Membranes 2019

• 3D-Printed Formwork for Prefabricated Concrete Slabs (2018)

  • Datum: 28.11.2018
  • Autoren: Dr. Andrei Jipa, Mania Aghaei Meibodi, Dr. Rena Giesecke, Demetris Shammas, Dr. Matthias Leschok, Mathias Bernhard, Prof. Benjamin Dillenburger
  • Event: 1st International Conference on 3D Construction Printing (3DcP)
  • Bemerkungen: Conference lecture held on 28 November 2018.

• Environmental assessment of multi-functional building elements constructed with digital fabrication techniques (2018)

  • Datum: 01.11.2018
  • Autoren: Dr. Isolda Agustí Juan, Dr. Andrei Jipa, Prof. Dr. Guillaume Habert
  • Bemerkungen: It was possible to publish this article open access thanks to a Swiss National Licence with the publisher.

• Smart Slab: Computational Design and Digital Fabrication of a Lightweight Concrete Slab (2018)

  • Datum: 01.01.2018
  • Autoren: Mania Aghaei Meibodi, Dr. Andrei Jipa, Dr. Rena Giesecke, Demetris Shammas, Mathias Bernhard, Dr. Matthias Leschok, Dr. Konrad Graser, Prof. Benjamin Dillenburger
  • Event: 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA 2018)
  • Bemerkungen: Paper presented on Thursday 18th October 2018.

• Complex architectural elements from HPFRC and 3D printed sandstone (2017)

  • Datum: 02.10.2017
  • Autoren: Nicolas Ruffray, Mathias Bernhard, Dr. Andrei Jipa, Mania Aghaei Meibodi, Neil Montague de Taisne, Felix Stutz, Dr. Timothy Wangler, Prof. Dr. Robert Flatt, Prof. Benjamin Dillenburger
  • Event: 3rd International Symposium on Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC 2017)

• Geopolymers for inorganic binder in 3D printing application in construction (2017)

  • Datum: 14.07.2017
  • Autoren: Dr. Vera Voney, Dr. Gnanli Landrou, Dr. Andrei Jipa, Pietro Odaglia, Dr. Isolda Agustí Juan, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert
  • Event: II European Geopolymer Network

• The Smart Takes from the Strong (2017)

  • Datum: 03.04.2017
  • Autoren: Mania Aghaei-Meibodi, Mathias Bernhard, Dr. Andrei Jipa, Prof. Benjamin Dillenburger
  • Event: Fabricate 2017

• skelETHon Formwork: 3D Printed Plastic Formwork for Load-Bearing Concrete Structures (2017)

  • Datum: 01.01.2017
  • Autoren: Dr. Andrei Jipa, Mathias Bernhard, Prof. Benjamin Dillenburger, Nicolas Ruffray, Dr. Timothy Wangler, Prof. Dr. Robert Flatt
  • Event: XXI Congreso Internacional de la Sociedad Iberoamericana de Gráfica Digital (SIGraDi 2017)

• 3D-Printed Stay-in-Place Formwork for Topologically Optimized Concrete Slabs (2016)

  • Datum: 04.11.2016
  • Autoren: Dr. Andrei Jipa, Mathias Bernhard, Prof. Dr. Mania Aghaei Meibodi, Prof. Benjamin Dillenburger
  • Event: 2016 TxA Emerging Design + Technology Conference

• Powder-Based 3D Printing for Building Components (2016)

  • Datum: 01.09.2016
  • Autoren: Dr. Andrei Jipa, Mathias Bernhard, Prof. Dr. Mania Aghaei Meibodi, Prof. Benjamin Dillenburger
  • Event: Advances in Architectural Geometry 2016 (AAG 2016)

Medienmitteilungen

• Swiss researchers develop method of printing complex structures with half the concrete
• Komplexe Sparsamkeit
• 'fast complexity' project employs 3D printing to make concrete use more efficient

E-Mail

UQ.JUKY.UQLS@SDGZ@

Externe URL(s)

• Andrei Jipa
• Digital Building Technologies