Position im NFS Digitale Fabrikation

Postdoctoral Researcher

Zugehörige Forschungsgruppe

Physical Chemistry of Building Materials, ETH Zurich

NFS Publikationen

• Opportunities and future perspectives (2024)

  • Datum: 01.01.2024
  • Autoren: Dr. Timothy Wangler

• 3D Printing Concrete: Motivations, Current Status, and Outlook (2023)

  • Datum: 01.12.2023
  • Autoren: Dr. Timothy Wangler

• Using micro-XRF to characterize chloride ingress through cold joints in 3D printed concrete (2023)

  • Datum: 01.04.2023
  • Autoren: Paula Bran-Anleu, Dr. Timothy Wangler, Venkatesh N. Nerella, Viktor Mechtcherine, Pavel Trtik, Prof. Dr. Robert Flatt

• On sustainability and digital fabrication with concrete (2022)

  • Datum: 01.08.2022
  • Autoren: Prof. Dr. Robert Flatt, Dr. Timothy Wangler

• Assessing the fresh properties of printable cement-based materials: High potential tests for quality control (2022)

  • Datum: 01.08.2022
  • Autoren: Dr. Lex Reiter, Richard Buswell, Nicolas Ducoulombier, Irina Ivanova, Kolawole John Temitope, Dirk Lowke, Viktor Mechtcherine, Romain Mesnil, Arnaud Perrot, Ursula Pott, Nicolas Roussel, Dietmar Stephan, Dr. Timothy Wangler, Rob Wolfs, Wenqiang Zuo

• Digitally fabricated ribbed concrete floor slabs: a sustainable solution for construction (2022)

  • Datum: 06.07.2022
  • Autoren: Dr. Jaime Mata Falcón, Patrick Bischof, Dr. Tobias Huber, Dr. Ana Anton, Dr. Joris Burger, Dr. Francesco Ranaudo, Andrei Jipa, Dr. Lukas Gebhard, Dr. Lex Reiter, Prof. Dr. Ena Lloret-Fritschi, Dr. Tom Van Mele, Prof. Dr. Philippe Block, Prof. Fabio Gramazio, Prof. Matthias Kohler, Prof. Benjamin Dillenburger, Dr. Timothy Wangler, Prof. Dr. Walter Kaufmann

• Slow penetration for characterizing concrete for digital fabrication (2022)

  • Datum: 01.07.2022
  • Autoren: Dr. Lex Reiter, Nicolas Roussel, Dr. Timothy Wangler, Prof. Dr. Robert Flatt

• Effect of processing on the air void system of 3D printed concrete (2022)

  • Datum: 01.06.2022
  • Autoren: Dr. Arnesh Das, Yu Song, Dr. Sara Mantellato, Dr. Timothy Wangler, David A. Lange, Prof. Dr. Robert Flatt

• Microstructural examination of carbonated 3D printed concrete (2022)

  • Datum: 01.05.2022
  • Autoren: Asel Maria Aguilar Sanchez, Dr. Timothy Wangler, Matteo Stefanoni, Ueli Angst

• A chemical process engineering look at digital concrete processes: critical step design, inline mixing, and scaleup (2022)

  • Datum: 01.05.2022
  • Autoren: Dr. Timothy Wangler, Prof. Rafael Pileggi, Seyma Gürel, Prof. Dr. Robert Flatt

• Digitale Fertigung im Betonbau (2022)

  • Datum: 01.01.2022
  • Autoren: Ksenija Vasilic, Prof. Dr. Norman Hack, Harald Kloft, Dirk Lowke, Viktor Mechtcherine, Venkatesh Naidu Nerella, Dr. Timothy Wangler

• Digital Fabrication with Cement-Based Materials: Process Classification and Case Studies (2022)

  • Datum: 01.01.2022
  • Autoren: Richard A. Buswell, Freek P. Bos, Wilson Ricardo Leal da Silva, Prof. Dr. Norman Hack, Harald Kloft, Dirk Lowke, Niklas Freund, Asko Fromm, Enrico Dini, Nicolas Roussel, Dr. Timothy Wangler, Roel Schipper, Viktor Mechtcherine, Arnaud Perrot, Ksenija Vasilic, Prof. Dr. Ena Lloret-Fritschi

• A 3D Printing Platform for Reinforced Printed-Sprayed Concrete Composites (2022)

  • Datum: 01.01.2022
  • Autoren: Dr. Lex Reiter, Dr. Ana Anton, Dr. Timothy Wangler, Prof. Benjamin Dillenburger, Prof. Dr. Robert Flatt
  • Event: 3rd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2022)

• Two Year Exposure of 3D Printed Cementitious Columns in a High Alpine Environment (2022)

  • Datum: 01.01.2022
  • Autoren: Dr. Timothy Wangler, Asel Maria Aguilar Sanchez, Dr. Ana Anton, Prof. Benjamin Dillenburger, Prof. Dr. Robert Flatt
  • Event: 3rd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2022)
  • Bemerkungen: Conference lecture held on June 29, 2022.

• Printable Cement-Based Materials: Fresh Properties Measurements and Control (2022)

  • Datum: 01.01.2022
  • Autoren: Dr. Timothy Wangler, Nicolas Roussel, Prof. Dr. Robert Flatt, Arnaud Perrot, Mohammed Sonebi, Rob Wolfs, Freek Bos, Dirk Lowke, Niklas Freund, Dietmar Stephan, Ursula Pott, Dr. Lex Reiter, Steffen Grünewald, Wilson Ricardo Leal da Silva, Gert De Schutter

• Digital Fabrication with Cement-Based Materials: Underlying Physics (2022)

  • Datum: 01.01.2022
  • Autoren: Viktor Mechtcherine, Shirin Fataei, Freek P. Bos, Richard A. Buswell, Wilson Ricardo Leal da Silva, Emmanuel Keita, Hans-Werner Krauss, Dirk Lowke, Arnaud Perrot, Venkatesh Naidu Nerella, Dr. Timothy Wangler, Mohammed Sonebi, Nicolas Roussel, Daniel Weger, Rob Wolfs

• Freeze-Thaw Performance of 3D Printed Concrete: Influence of Interfaces (2022)

  • Datum: 01.01.2022
  • Autoren: Dr. Arnesh Das, Asel Maria Aguilar Sanchez, Dr. Timothy Wangler, Prof. Dr. Robert Flatt
  • Event: 3rd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2022)

• Eco-Friendly, Set-on-Demand Digital Concrete (2022)

  • Datum: 01.01.2022
  • Autoren: Federica Boscaro, Elia Quadranti, Dr. Timothy Wangler, Dr. Sara Mantellato, Dr. Lex Reiter, Prof. Dr. Robert Flatt

• Material-informed Formwork Geometry (2021)

  • Datum: 01.09.2021
  • Autoren: Dr. Joris Burger, Dr. Timothy Wangler, Yu-Hung Chiu, Chanon Techathuvanun, Prof. Fabio Gramazio, Prof. Matthias Kohler, Prof. Dr. Ena Lloret-Fritschi
  • Event: 39th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2021)
  • Bemerkungen: Conference lecture held on September 8, 2021

• A 3D concrete printing prefabrication platform for bespoke columns (2021)

  • Datum: 01.02.2021
  • Autoren: Dr. Ana Anton, Dr. Lex Reiter, Dr. Timothy Wangler, Valens Frangez, Prof. Dr. Robert Flatt, Prof. Benjamin Dillenburger

• Digital Fabrication in Concrete Construction (2020)

  • Datum: 01.09.2020
  • Autoren: Dr. Timothy Wangler
  • Event: 48th annual Convention of the Institute of Concrete Technology ‘Getting More from Less’ (ICT 2020)
  • Bemerkungen: Conference lecture held on September 3, 2020. Due to the Coronavirus (COVID-19) the conference was conducted virtually.

• From Smart Dynamic Casting to a growing family of Digital Casting Systems (2020)

  • Datum: 01.08.2020
  • Autoren: Prof. Dr. Ena Lloret-Fritschi, Fabio Scotto, Dr. Timothy Wangler, Dr. Lukas Gebhard, Dr. Jaime Mata Falcón, Dr. Sara Mantellato, Dr. Joris Burger, Dr. Anna Szabó, Nicholas Ruffray, Dr. Lex Reiter, Federica Boscaro, Prof. Dr. Walter Kaufmann, Prof. Matthias Kohler, Prof. Fabio Gramazio, Prof. Dr. Robert Flatt

• A process classification framework for defining and describing Digital Fabrication with Concrete (2020)

  • Datum: 01.08.2020
  • Autoren: Richard A. Buswell, Wilson R. Leal da Silva, Freek P. Bos, H.R. Schipper, Dirk Lowke, Prof. Dr. Norman Hack, Harald Kloft, Viktor Mechtcherine, Dr. Timothy Wangler, N. Roussel

• Influence of pumping/extrusion on the air-void system of 3D printed concrete (2020)

  • Datum: 01.07.2020
  • Autoren: Dr. Arnesh Das, Yu Song, Dr. Sara Mantellato, Dr. Timothy Wangler, Prof. Dr. Robert Flatt, David Lange
  • Event: 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2020) (virtual)

• Structural stay-in-place formwork for robotic in situ fabrication of non-standard concrete structures: A real scale architectural demonstrator (2020)

  • Datum: 01.07.2020
  • Autoren: Prof. Dr. Norman Hack, Prof. Dr. Kathrin Dörfler, Alex Walzer, Dr. Timothy Wangler, Dr. Jaime Mata Falcón, Dr. Nitish Kumar, Prof. Dr. Jonas Buchli, Prof. Dr. Walter Kaufmann, Prof. Dr. Robert Flatt, Prof. Fabio Gramazio, Prof. Matthias Kohler

• Setting on demand for digital concrete – Principles, measurements, chemistry, validation (2020)

  • Datum: 01.06.2020
  • Autoren: Dr. Lex Reiter, Dr. Timothy Wangler, Dr. Ana Anton, Prof. Dr. Robert Flatt

• Concrete Choreography: Prefabrication of 3D-Printed Columns (2020)

  • Datum: 06.04.2020
  • Autoren: Dr. Ana Anton, Patrick Bedarf, Angela Yoo, Prof. Benjamin Dillenburger, Dr. Lex Reiter, Dr. Timothy Wangler, Prof. Dr. Robert Flatt
  • Event: Fabricate 2020 (virtual)
  • Bemerkungen: Due to the Coronavirus (COVID-19) the conference was conducted virtually.

• Residence Time Distributions in Continuous Processing of Concrete (2020)

  • Datum: 01.01.2020
  • Autoren: Dr. Timothy Wangler, Fabio Scotto, Prof. Dr. Ena Lloret-Fritschi, Prof. Dr. Robert Flatt
  • Event: 2nd International RILEM Conference on Rheology and Processing of Construction Materials (RheoCon2 2019) and 9th International RILEM Symposium on Self-Compacting Concrete (SCC9 2019)
  • Bemerkungen: Conference lecture on September 10, 2019.

• ACDC: The Admixture Controlled Digital Casting and its Application to Thin Folded Concrete Structures (2020)

  • Datum: 01.01.2020
  • Autoren: Dr. Anna Szabó, Dr. Lex Reiter, Prof. Dr. Ena Lloret-Fritschi, Dr. Timothy Wangler, Prof. Fabio Gramazio, Prof. Matthias Kohler, Prof. Dr. Robert Flatt

• Formwork Fabrication Freedom for a Concrete Canoe (2019)

  • Datum: 06.09.2019
  • Autoren: Andrei Jipa, Nicolas Ruffray, Mathias Bernhard, Dr. Timothy Wangler, Prof. Dr. Robert Flatt, Prof. Benjamin Dillenburger

• Additive Manufacturing Processes for Infrastructure Construction: A Review (2019)

  • Datum: 01.09.2019
  • Autoren: Abhinav Bhardwaj, Scott Z. Jones, Negar Kalantar, Zhijian Pei, John Vickers, Dr. Timothy Wangler, Pablo Zavattieri, Na Zou

• Materials in Construction: Moving Towards More Ecological and Digital Usage (2019)

  • Datum: 01.06.2019
  • Autoren: Dr. Timothy Wangler
  • Event: Swiss Tunnel Kolloquium 2019

• Digital Concrete: Research and Applications (2019)

  • Datum: 01.05.2019
  • Autoren: Dr. Timothy Wangler
  • Event: 10th International Concrete Congress

• Hydration control of ternary cements for digital fabrication with concrete (2019)

  • Datum: 01.01.2019
  • Autoren: Dr. Arnesh Das, Dr. Lex Reiter, Dr. Timothy Wangler, Prof. Dr. Robert Flatt
  • Event: 2nd International RILEM Conference on Rheology and Processing of Construction Materials (RheoCon2 2019) and 9th International RILEM Symposium on Self-Compacting Concrete (SCC9 2019)
  • Bemerkungen: Conference lecture held on September 11, 2019

• Vertical Modulations (2019)

  • Datum: 01.01.2019
  • Autoren: Dr. Ana Anton, Angela Yoo, Patrick Bedarf, Dr. Lex Reiter, Dr. Timothy Wangler, Prof. Benjamin Dillenburger
  • Event: 39th Annual Conference of the Association for Computer Aided Design in Architecture: Ubiquity and Autonomy (ACADIA 2019)
  • Bemerkungen: Conference lecture on October 26, 2019.

• Digital Concrete Processing: A Review (2018)

  • Datum: 26.11.2018
  • Autoren: Dr. Timothy Wangler
  • Event: 1st International Conference on 3D Construction Printing (3DcP 2018)
  • Bemerkungen: Conference lecture held on November 26, 2018

• Editorial for special issue on digital concrete (2018)

  • Datum: 01.10.2018
  • Autoren: Prof. Dr. Robert Flatt, Dr. Timothy Wangler

• The role of early age structural build-up in digital fabrication with concrete (2018)

  • Datum: 01.10.2018
  • Autoren: Dr. Lex Reiter, Nicolas Roussel, Dr. Timothy Wangler, Prof. Dr. Robert Flatt

• Continuous characterisation method for structural buildup (2018)

  • Datum: 10.09.2018
  • Autoren: Dr. Lex Reiter, Nicolas Roussel, Dr. Timothy Wangler, Prof. Dr. Robert Flatt
  • Event: 1st International Conference on Concrete and Digital Fabrication (DigitalConcrete 2018)
  • Bemerkungen: Poster presented on 10 September 2018.

• Chloride Ingress Through Cold Joints in Digitally Fabricated Concrete by micro-XRF Mapping (2018)

  • Datum: 10.09.2018
  • Autoren: Paula C. Bran Anleu, Dr. Timothy Wangler, Prof. Dr. Robert Flatt
  • Event: 1st RILEM International Conference on Concrete and Digital Fabrication (DigitalConcrete 2018)

• Challenges in full scale filling of a digitally fabricated leaky formwork (2018)

  • Datum: 10.09.2018
  • Autoren: Hannes Heller, Dr. Timothy Wangler, Prof. Dr. Norman Hack, Alex Walzer, Prof. Dr. Robert Flatt
  • Event: 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018)
  • Bemerkungen: Poster presented on 10 September 2018.

• Challenges of Real-Scale Production with Smart Dynamic Casting (2018)

  • Datum: 01.09.2018
  • Autoren: Prof. Dr. Ena Lloret-Fritschi, Fabio Scotto, Prof. Fabio Gramazio, Prof. Matthias Kohler, Dr. Konrad Graser, Dr. Timothy Wangler, Dr. Lex Reiter, Prof. Dr. Robert Flatt, Dr. Jaime Mata Falcón
  • Event: 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018)

• Potentials of Steel Fibres for Mesh Mould Elements (2018)

  • Datum: 01.09.2018
  • Autoren: Patrick Pfändler, Dr. Timothy Wangler, Dr. Jaime Mata Falcón, Prof. Dr. Robert Flatt, Prof. Dr. Walter Kaufmann
  • Event: 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018)

• Complex architectural elements from HPFRC and 3D printed sandstone (2017)

  • Datum: 02.10.2017
  • Autoren: Andrei Jipa, Nicolas Ruffray, Mathias Bernhard, Mania Aghaei Meibodi, Neil Montague de Taisne, Felix Stutz, Dr. Timothy Wangler, Prof. Dr. Robert Flatt, Prof. Benjamin Dillenburger
  • Event: 3rd International Symposium on Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC 2017)

• Potential benefits of digital fabrication for complex structures: Environmental assessment of a robotically fabricated concrete wall (2017)

  • Datum: 15.06.2017
  • Autoren: Dr. Isolda Agustí Juan, Florian Müller, Prof. Dr. Norman Hack, Dr. Timothy Wangler, Prof. Dr. Guillaume Habert

• Mesh Mould: An On Site, Robotically Fabricated, Functional Formwork (2017)

  • Datum: 01.03.2017
  • Autoren: Prof. Dr. Norman Hack, Dr. Timothy Wangler, Dr. Jaime Mata Falcón, Prof. Dr. Kathrin Dörfler, Dr. Nitish Kumar, Alex Walzer, Dr. Konrad Graser, Dr. Lex Reiter, Heinz Richner, Prof. Dr. Jonas Buchli, Prof. Dr. Walter Kaufmann, Prof. Dr. Robert Flatt, Prof. Fabio Gramazio, Prof. Matthias Kohler
  • Event: Second Concrete Innovation Conference (2nd CIC)
  • Bemerkungen: Presented on March 7, 2017. Conference paper only available online.

• Digital Concrete: Opportunities and Challenges (2017)

  • Datum: 01.01.2017
  • Autoren: Dr. Timothy Wangler, Ena Lloret, Nicolas Roussel, Mathias Bernhard, Dr. Lex Reiter, Prof. Dr. Norman Hack, Prof. Fabio Gramazio, Prof. Matthias Kohler, Prof. Benjamin Dillenburger, Prof. Dr. Jonas Buchli, Prof. Dr. Robert Flatt

• Smart Dynamic Casting (2017)

  • Datum: 01.01.2017
  • Autoren: Prof. Dr. Ena Lloret-Fritschi, Dr. Lex Reiter, Dr. Timothy Wangler, Prof. Fabio Gramazio, Prof. Matthias Kohler, Prof. Dr. Robert Flatt
  • Event: HPC/CIC Tromsø 2017. Eleventh High Performance Concrete (11th HPC) and the Second Concrete Innovation Conference (2nd CIC)

• skelETHon Formwork: 3D Printed Plastic Formwork for Load-Bearing Concrete Structures (2017)

  • Datum: 01.01.2017
  • Autoren: Andrei Jipa, Nicolas Ruffray, Mathias Bernhard, Prof. Benjamin Dillenburger, Dr. Timothy Wangler, Prof. Dr. Robert Flatt
  • Event: XXI Congreso Internacional de la Sociedad Iberoamericana de Gráfica Digital (SIGraDi 2017)

• Feedback control of Smart Dynamic Casting through formwork friction measurements (2016)

  • Datum: 01.01.2016
  • Autoren: Marc Schultheiss, Dr. Timothy Wangler, Nicolas Roussel, Dr. Lex Reiter, Prof. Dr. Robert Flatt
  • Event: 8th International RILEM Symposium on Self-Compacting Concrete, SCC 2016

E-Mail

UQ.JUKY.IHS2.2OG@LYRI3SX@

Telefon

+41 44 633 29 43