Position im NFS Digitale Fabrikation

Principal Investigator, Steering Committee

Teammitglieder

• Dominik Reisach
• Matthias Brenner
• Dr. Alejandro Giraldo Soto: Structural dry-joint connections of 3D concrete-printed components
• Dr. Anna Szabó
• Patrick Bedarf
• Dr. Hyunchul Kwon: Digital Composites
• Andrei Jipa
• Dr. Ana Anton
• Dr. Marirena Kladeftira: Capsules of Complexity
• Pietro Odaglia: Inorganic Binderjet 3D Printing in Architecture
• Dr. Matthias Leschok

Focus Topics

• Focus topic 3

NFS Publikationen

• Tor Alva: A 3D Concrete Printed Tower (2024)

  • Datum: 01.04.2024
  • Autoren: Dr. Ana Anton, Che Wei Lin, Eleni Skevaki, Ming-Yang Wang, Dr. Timothy Wangler, Prof. Dr. Robert Flatt, Dr. Alejandro Giraldo Soto, Dr. Lukas Gebhard, Prof. Dr. Walter Kaufmann, Michael Hansmeyer, Prof. Benjamin Dillenburger

• Seismic performance of Fe-SMA prestressed segmental bridge columns with 3D printed permanent concrete formwork (2024)

  • Datum: 01.03.2024
  • Autoren: Saim Raza, Zafiris Triantafyllidis, Ana-Maria Anton, Prof. Benjamin Dillenburger, Moslem Shahverdi

• Prōtóplasto (2024)

  • Datum: 01.01.2024
  • Autoren: Dr. Matthias Leschok, Dr. Marirena Kladeftira, Nik Eftekhar Olivo, Prof. Benjamin Dillenburger
  • Event: Fabricate 2024

• Thermoplastic large-scale 3D printing of a light-distribution and fabrication-informed facade panel (2023)

  • Datum: 01.10.2023
  • Autoren: Dr. Ina Cheibas, Prof. Dr. Ena Lloret-Fritschi, Valeria Piccioni, Dr. Matthias Leschok, Prof. Benjamin Dillenburger, Prof. Dr. Arno Schlüter, Prof. Fabio Gramazio, Prof. Matthias Kohler
  • Event: 18th Advanced Building Skins Conference & Expo

• Understanding Stakeholders’ Intention to Use Construction Robots: A Fuzzy-set Qualitative Comparative Analysis (2023)

  • Datum: 13.09.2023
  • Autoren: Sihui Wu, Alex Walzer, Aniko Kahlert, Prof. Benjamin Dillenburger, Prof. Dr. Daniel Hall
  • Event: The Future of Construction 2023: Symposium on Human-Machine Teams for Design and Sustainable Construction
  • Bemerkungen: Poster presented on September 13, 2023.

• Large-scale hollow-core 3D printing (HC3DP): A polymer 3D printing technology for large-scale ultralightweight components (2023)

  • Datum: 01.09.2023
  • Autoren: Dr. Matthias Leschok, Dr. Lex Reiter, Prof. Benjamin Dillenburger

• Foamwork: Challenges and strategies in using mineral foam 3D printing for a lightweight composite concrete slab (2023)

  • Datum: 01.09.2023
  • Autoren: Patrick Bedarf, Dr. Anna Szabó, Enrico Scoccimarro, Prof. Benjamin Dillenburger
  • Bemerkungen: Special Issue: CAADRIA 2023

• 3D printing facades: Design, fabrication, and assessment methods (2023)

  • Datum: 01.08.2023
  • Autoren: Dr. Matthias Leschok, Dr. Ina Cheibas, Valeria Piccioni, Bharath Seshadri, Prof. Dr. Arno Schlüter, Prof. Fabio Gramazio, Prof. Matthias Kohler, Prof. Benjamin Dillenburger

• Mineral composites: stay-in-place formwork for concrete using foam 3D printing (2023)

  • Datum: 01.06.2023
  • Autoren: Patrick Bedarf, Cristian Calvo-Barentin, Dinorah Martinez Schulte, Ayca Senol Güngör, Etienne Jeoffroy, Prof. Benjamin Dillenburger

• 3D-printed formworks for glass fibre reinforced shotcrete (2023)

  • Datum: 09.05.2023
  • Autoren: Andrei Jipa, Theo Bürgin, Prof. Benjamin Dillenburger
  • Event: 18th International Glassfibre Reinforced Concrete Association Congress (GRC2023)

• Robotic 3D Printing of Geopolymer Foam for Lightweight and Insulating Building Elements (2023)

  • Datum: 15.02.2023
  • Autoren: Patrick Bedarf, Dr. Anna Szabó, Michele Zanini, Prof. Benjamin Dillenburger

• Light Distribution in 3D-Printed Thermoplastics (2023)

  • Datum: 01.01.2023
  • Autoren: Dr. Ina Cheibas, Valeria Piccioni, Prof. Dr. Ena Lloret-Fritschi, Dr. Matthias Leschok, Prof. Dr. Arno Schlüter, Prof. Benjamin Dillenburger, Prof. Fabio Gramazio, Prof. Matthias Kohler

• Printing thermal performance: an experimental exploration of 3DP polymers for facade applications (2023)

  • Datum: 01.01.2023
  • Autoren: Valeria Piccioni, Dr. Matthias Leschok, Dr. Gearóid Lydon, Dr. Ina Cheibas, Illias Hischier, Prof. Benjamin Dillenburger, Prof. Matthias Kohler, Prof. Fabio Gramazio, Arno Schlueter
  • Event: SBE 2023 Thessaloniki "Sustainable Built Environments: Paving the Way for Archiving the Targets of 2030 and Beyond"

• Environmental stress cracking of 3D-printed polymers exposed to concrete (2022)

  • Datum: 01.10.2022
  • Autoren: Andrei Jipa, Dr. Lex Reiter, Prof. Dr. Robert Flatt, Prof. Benjamin Dillenburger
  • Bemerkungen: Thermoplastic Selection for Formwork

• Digitally fabricated ribbed concrete floor slabs: a sustainable solution for construction (2022)

  • Datum: 06.07.2022
  • Autoren: Dr. Jaime Mata Falcón, Patrick Bischof, Dr. Tobias Huber, Dr. Ana Anton, Dr. Joris Burger, Dr. Francesco Ranaudo, Andrei Jipa, Dr. Lukas Gebhard, Dr. Lex Reiter, Prof. Dr. Ena Lloret-Fritschi, Dr. Tom Van Mele, Prof. Dr. Philippe Block, Prof. Fabio Gramazio, Prof. Matthias Kohler, Prof. Benjamin Dillenburger, Dr. Timothy Wangler, Prof. Dr. Walter Kaufmann

• 3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications (2022)

  • Datum: 01.04.2022
  • Autoren: Andrei Jipa, Prof. Benjamin Dillenburger

• Column-Slab Interfaces for 3D Concrete Printing (2022)

  • Datum: 01.01.2022
  • Autoren: Ana-Maria Anton, Eleni Skevaki, Patrick Bischof, Dr. Lex Reiter, Prof. Benjamin Dillenburger
  • Event: 42nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA 2022)
  • Bemerkungen: Conference lecture held on October 27, 2022.

• Exploring the potential of equilibrium-based methods in additive manufacturing: the Digital Bamboo pavilion (2022)

  • Datum: 01.01.2022
  • Autoren: Dr. Davide Tanadini, Patrick Ole Ohlbrock, Dr. Marirena Kladeftira, Dr. Matthias Leschok, Eleni Skevaki, Prof. Benjamin Dillenburger, Pierluigi D'Acunto
  • Event: Annual Symposium of the International Association for Shell and Spatial Structures (IASS 2022)

• Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab (2022)

  • Datum: 01.01.2022
  • Autoren: Patrick Bedarf, Dr. Anna Szabó, Michele Zanini, Alex Heusi, Prof. Benjamin Dillenburger
  • Event: 27th Annual Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2022)

• A 3D Printing Platform for Reinforced Printed-Sprayed Concrete Composites (2022)

  • Datum: 01.01.2022
  • Autoren: Dr. Lex Reiter, Dr. Ana Anton, Dr. Timothy Wangler, Prof. Benjamin Dillenburger, Prof. Dr. Robert Flatt
  • Event: 3rd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2022)

• Two Year Exposure of 3D Printed Cementitious Columns in a High Alpine Environment (2022)

  • Datum: 01.01.2022
  • Autoren: Dr. Timothy Wangler, Asel Maria Aguilar Sanchez, Dr. Ana Anton, Prof. Benjamin Dillenburger, Prof. Dr. Robert Flatt
  • Event: 3rd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2022)
  • Bemerkungen: Conference lecture held on June 29, 2022.

• Reinforcement lattices for 3DCP: A fabrication method based on ruled surfaces (2022)

  • Datum: 01.01.2022
  • Autoren: Dr. Ana Anton, Dr. Lex Reiter, Eleni Skevaki, Prof. Benjamin Dillenburger
  • Event: 5th International Conference on Structures and Architecture (ICSA 2022)

• Pre-installed Reinforcement for 3D Concrete Printing (2022)

  • Datum: 01.01.2022
  • Autoren: Dr. Lukas Gebhard, Patrick Bischof, Dr. Ana Anton, Dr. Jaime Mata Falcón, Prof. Benjamin Dillenburger, Prof. Dr. Walter Kaufmann
  • Event: 3rd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2022)
  • Bemerkungen: Conference lecture held on June 28, 2022

• Foam 3D printing for construction: A review of applications, materials, and processes (2021)

  • Datum: 01.10.2021
  • Autoren: Patrick Bedarf, Alessandro Dutto, Michele Zanini, Prof. Benjamin Dillenburger

• Fast Complexity: Additive Manufacturing for Bespoke Concrete Slabs (2021)

  • Datum: 01.08.2021
  • Autoren: Dr. Ana Anton, Andrei Jipa, Dr. Lex Reiter, Prof. Benjamin Dillenburger
  • Event: 40th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA 2020)

• Structural behaviour of 3D printed concrete beams with various reinforcement strategies (2021)

  • Datum: 01.08.2021
  • Autoren: Dr. Lukas Gebhard, Dr. Jaime Mata Falcón, Dr. Ana Anton, Prof. Benjamin Dillenburger, Prof. Dr. Walter Kaufmann

• From casting to 3D printing geopolymers: A proof of concept (2021)

  • Datum: 01.03.2021
  • Autoren: Dr. Vera Voney, Pietro Odaglia, Coralie Brumaud, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert

• A 3D concrete printing prefabrication platform for bespoke columns (2021)

  • Datum: 01.02.2021
  • Autoren: Dr. Ana Anton, Dr. Lex Reiter, Dr. Timothy Wangler, Valens Frangez, Prof. Dr. Robert Flatt, Prof. Benjamin Dillenburger

• Robotic 3D Printing of Mineral Foam for a Lightweight Composite Facade Shading Panel (2021)

  • Datum: 01.01.2021
  • Autoren: Patrick Bedarf, Dinorah Martinez Schulte, Ayca Senol Güngör, Etienne Jeoffroy, Prof. Benjamin Dillenburger
  • Event: 26th International Conference of the Association for Computer-Aided Architectural Design Research in Asia: Projections (CAADRIA 2021) (virtual)
  • Bemerkungen: Conference lecture held on March 30, 2021. Due to the Coronavirus (COVID-19) the conference was conducted virtually.

• Redefining Polyhedral Space Through 3D Printing (2021)

  • Datum: 01.01.2021
  • Autoren: Dr. Marirena Kladeftira, Dr. Matthias Leschok, Eleni Skevaki, Prof. Benjamin Dillenburger
  • Event: 2020 Advances in Architectural Geometry Conference (AAG 2020)
  • Bemerkungen: Conference lecture held on April 29, 2021. The conference should have taken place in Paris on August 30 - September 2, 2020. Due to Corona virus (COVID-19) the conference was rescheduled to April 26-29, 2021 and was conducted virtually.

• Machine Sensing for Mineral Foam 3D Printing (2021)

  • Datum: 01.01.2021
  • Autoren: Patrick Bedarf, Dr. Anna Szabó, Michele Zanini, Prof. Benjamin Dillenburger
  • Event: International Conference on Intelligent Robots and Systems: Workshop Robotic Fabrication (IROS 2021)

• Powder bed 3D printing with quarry waste (2020)

  • Datum: 01.11.2020
  • Autoren: Dr. Vera Voney, Pietro Odaglia, Filippo Schenker, Coralie Brumaud, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert
  • Event: World Sustainable Built Environment (BEYOND 2020) (virtual)
  • Bemerkungen: Due to the Coronavirus (COVID-19) the conference was conducted virtually.

• Experimental investigation of reinforcement strategies for concrete extrusion 3D printed beams (2020)

  • Datum: 01.08.2020
  • Autoren: Dr. Lukas Gebhard, Dr. Jaime Mata Falcón, Dr. Ana Anton, Prof. Benjamin Dillenburger, Prof. Dr. Walter Kaufmann
  • Event: 13th fib International PhD Symposium in Civil Engineering (2020)
  • Bemerkungen: Conference lecture held on August 26, 2020. Due to the Coronavirus (COVID-19) the conference was conducted virtually. Awarded with the Best Paper Award in the category Innovation in Materials and Structures.

• Concrete Choreography: Prefabrication of 3D-Printed Columns (2020)

  • Datum: 06.04.2020
  • Autoren: Dr. Ana Anton, Patrick Bedarf, Angela Yoo, Prof. Benjamin Dillenburger, Dr. Lex Reiter, Dr. Timothy Wangler, Prof. Dr. Robert Flatt
  • Event: Fabricate 2020 (virtual)
  • Bemerkungen: Due to the Coronavirus (COVID-19) the conference was conducted virtually.

• Large-Scale 3D Printing for Functionally-Graded Facade (2020)

  • Datum: 01.01.2020
  • Autoren: Yoana Taseva, Nik Eftekhar Olivo, Dr. Hyunchul Kwon, Dr. Matthias Leschok, Prof. Benjamin Dillenburger
  • Event: 25th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2020)

• Generative Modelling with Design Constraints – Reinforcement Learning for Object Generation (2020)

  • Datum: 01.01.2020
  • Autoren: Yuta Akizuki, Dr. Marirena Kladeftira, Mathias Bernhard, Reza Kakooee, Prof. Benjamin Dillenburger
  • Event: 5th Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2020)

• Aligned Interlayer Fibre Reinforcement and Post-tensioning as a Reinforcement Strategy for Digital Fabrication (2020)

  • Datum: 01.01.2020
  • Autoren: Dr. Lukas Gebhard, Dr. Jaime Mata Falcón, Dr. Ana Anton, Dr. Joris Burger, Prof. Dr. Ena Lloret-Fritschi, Dr. Lex Reiter, Prof. Benjamin Dillenburger, Prof. Fabio Gramazio, Prof. Matthias Kohler, Prof. Dr. Robert Flatt, Prof. Dr. Walter Kaufmann
  • Event: 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2020) (virtual)

• Fast Complexity: Additive Manufacturing for Prefabricated Concrete Slabs (2020)

  • Datum: 01.01.2020
  • Autoren: Dr. Ana Anton, Andrei Jipa, Dr. Lex Reiter, Prof. Benjamin Dillenburger
  • Event: 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2020) (virtual)
  • Bemerkungen: Due to the Corona virus (COVID-19) the conference was conducted virtually.

• Advances in Binder-Jet 3D Printing of Non-cementitious Materials (2020)

  • Datum: 01.01.2020
  • Autoren: Pietro Odaglia, Dr. Vera Voney, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert
  • Event: 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2020) (virtual)
  • Bemerkungen: Due to the Corona virus (COVID-19) the conference was conducted virtually.

• Geopolymer formulation for binder jet 3D printing (2020)

  • Datum: 01.01.2020
  • Autoren: Dr. Vera Voney, Pietro Odaglia, Coralie Brumaud, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert
  • Event: 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2020) (virtual)
  • Bemerkungen: Due to the Corona virus (COVID-19) the conference was conducted virtually.

• Optimized Internal Structures for 3D-Printed Sandwich Elements (2019)

  • Datum: 09.10.2019
  • Autoren: Dr. Hyunchul Kwon, Prof. Benjamin Dillenburger
  • Event: Form and Force - Joint International Conference of IASS Symposium 2019 (60th Anniversary) and Structural Membranes 2019, Barcelona, Spain, October 7-10, 2019
  • Bemerkungen: Conference paper presentation held on October 9, 2019

• Formwork Fabrication Freedom for a Concrete Canoe (2019)

  • Datum: 06.09.2019
  • Autoren: Andrei Jipa, Nicolas Ruffray, Mathias Bernhard, Dr. Timothy Wangler, Prof. Dr. Robert Flatt, Prof. Benjamin Dillenburger

• Concrete Extrusion 3D Printing across Disciplines • Opportunities for Customisation (2019)

  • Datum: 01.06.2019
  • Autoren: Dr. Ana Anton, Angela Yoo, Prof. Benjamin Dillenburger
  • Event: Swiss Tunnel Congress (STC 2019)

• Powder Bed 3D Printing with Geopolymers (2019)

  • Datum: 01.03.2019
  • Autoren: Dr. Vera Voney, Pietro Odaglia, Dr. Gnanli Landrou, Coralie Brumaud, Andrei Jipa, Dr. Isolda Agustí Juan, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert
  • Event: 2nd RILEM Spring Convention & International Conference on Sustainable Materials, Systems and Structures (SMSS2019)

• 3D-Printed Formwork for Integrated Funicular Concrete Slabs (2019)

  • Datum: 01.01.2019
  • Autoren: Andrei Jipa, Cristian Javier Calvo Barentin, Georgia Chousou, Dr. Gearóid Lydon, Dr. Matthias Rippmann, Matteo Lomaglio, Arno Schlueter, Prof. Dr. Philippe Block, Prof. Benjamin Dillenburger
  • Event: Form and Force – Joint International Conference of IASS Symposium 2019 (60th Anniversary) and Structural Membranes 2019

• Dissolvable 3DP Formwork (2019)

  • Datum: 01.01.2019
  • Autoren: Dr. Matthias Leschok, Prof. Benjamin Dillenburger
  • Event: 39th Annual Conference of the Association for Computer Aided Design in Architecture: Ubiquity and Autonomy (ACADIA 2019)

• Electrical skin: 3D-printed façade panel with integrated electric infrastructure (2019)

  • Datum: 01.01.2019
  • Autoren: Dr. Hyunchul Kwon, Thodoris Kyttas, Prof. Benjamin Dillenburger
  • Event: 14th Conference on Advanced Building Skins
  • Bemerkungen: Conference lecture on October 29, 2019.

• Numerical Sculpting - Volumetric Modelling Tools for in place Spatial Additive Manufacturing (2019)

  • Datum: 01.01.2019
  • Autoren: Dr. Ioanna Mitropoulou, Mathias Bernhard, Dr. Inés Ariza, Prof. Benjamin Dillenburger, Prof. Fabio Gramazio, Prof. Matthias Kohler
  • Event: Design Modelling Symposium, Impact: Design with All Senses

• Digital Composites: Robotic 3D Printing of Continuous Carbon Fiber-Reinforced Plastics for Functionally-Graded Building Components (2019)

  • Datum: 01.01.2019
  • Autoren: Dr. Hyunchul Kwon, Martin Eichenhofer, Thodoris Kyttas, Prof. Benjamin Dillenburger
  • Event: Robotic Fabrication in Architecture, Art and Design (Rob|Arch 2018)
  • Bemerkungen: Conference lecture held on September 14, 2018

• Vertical Modulations (2019)

  • Datum: 01.01.2019
  • Autoren: Dr. Ana Anton, Angela Yoo, Patrick Bedarf, Dr. Lex Reiter, Dr. Timothy Wangler, Prof. Benjamin Dillenburger
  • Event: 39th Annual Conference of the Association for Computer Aided Design in Architecture: Ubiquity and Autonomy (ACADIA 2019)
  • Bemerkungen: Conference lecture on October 26, 2019.

• Design strategies for a 3D printed acoustic mirror (2019)

  • Datum: 01.01.2019
  • Autoren: Dr. Marirena Kladeftira, Mathias Bernhard, Maria Pachi, Demetris Shammas, Prof. Benjamin Dillenburger
  • Event: 24th Annual Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2019)

• Digital Grotesque II, 2017 (2019)

  • Datum: 01.01.2019
  • Autoren: Michael Hansmeyer, Prof. Benjamin Dillenburger

• Bespoke Cast Facade (2019)

  • Datum: 01.01.2019
  • Autoren: Mania Aghaei Meibodi, Dr. Marirena Kladeftira, Thodoris Kyttas, Prof. Benjamin Dillenburger
  • Event: 39th Annual Conference of the Association for Computer Aided Design in Architecture: Ubiquity and Autonomy (ACADIA 2019)

• 3D printing sand molds for casting bespoke metal connections (2019)

  • Datum: 01.01.2019
  • Autoren: Mania Aghaei Meibodi, Dr. Rena Giesecke, Prof. Benjamin Dillenburger
  • Event: Intelligent & Informed: 24th Annual Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2019)

• 3D-Printed Formwork for Prefabricated Concrete Slabs (2018)

  • Datum: 28.11.2018
  • Autoren: Andrei Jipa, Mania Aghaei Meibodi, Mathias Bernhard, Demetris Shammas, Dr. Rena Giesecke, Dr. Matthias Leschok, Prof. Benjamin Dillenburger
  • Event: 1st International Conference on 3D Construction Printing (3DcP)
  • Bemerkungen: Conference lecture held on 28 November 2018.

• Particle-bed 3D printing in concrete construction – Possibilities and challenges (2018)

  • Datum: 01.10.2018
  • Autoren: Dirk Lowke, Enrico Dini, Arnaud Perrot, Daniel Weger, Christoph Gehlen, Prof. Benjamin Dillenburger

• Printing Whisper Dishes (2018)

  • Datum: 01.10.2018
  • Autoren: Dr. Marirena Kladeftira, Demetris Shammas, Mathias Bernhard, Prof. Benjamin Dillenburger
  • Event: 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA 2018)

• Smart Slab: Computational Design and Digital Fabrication of a Lightweight Concrete Slab (2018)

  • Datum: 01.01.2018
  • Autoren: Mania Aghaei Meibodi, Andrei Jipa, Mathias Bernhard, Demetris Shammas, Dr. Rena Giesecke, Dr. Matthias Leschok, Dr. Konrad Graser, Prof. Benjamin Dillenburger
  • Event: 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA 2018)
  • Bemerkungen: Paper presented on Thursday 18th October 2018.

• Smart Slab: Computational Design and Digital Fabrication of a Lightweight Concrete Slab (2018)

  • Datum: 01.01.2018
  • Autoren: Mania Aghaei Meibodi, Andrei Jipa, Mathias Bernhard, Demetris Shammas, Dr. Rena Giesecke, Dr. Matthias Leschok, Dr. Konrad Graser, Prof. Benjamin Dillenburger
  • Event: 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA 2018)
  • Bemerkungen: Paper presented on Thursday 18th October 2018.

• Submillimeter Formwork (2018)

  • Datum: 01.01.2018
  • Autoren: Andrei Jipa, Mathias Bernhard, Prof. Benjamin Dillenburger
  • Event: TxA 78th Annual Conference and Design Expo (TxA 2017)

• Volumetric modelling for 3D printed architecture (2018)

  • Datum: 01.01.2018
  • Autoren: Prof. Benjamin Dillenburger, Michael Hansmeyer, Mathias Bernhard
  • Event: Advances in Architectural Geometry Conference (AAG 2018)

• Complex architectural elements from HPFRC and 3D printed sandstone (2017)

  • Datum: 02.10.2017
  • Autoren: Andrei Jipa, Nicolas Ruffray, Mathias Bernhard, Mania Aghaei Meibodi, Neil Montague de Taisne, Felix Stutz, Dr. Timothy Wangler, Prof. Dr. Robert Flatt, Prof. Benjamin Dillenburger
  • Event: 3rd International Symposium on Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC 2017)

• Geopolymers for inorganic binder in 3D printing application in construction (2017)

  • Datum: 14.07.2017
  • Autoren: Dr. Vera Voney, Dr. Gnanli Landrou, Andrei Jipa, Pietro Odaglia, Dr. Isolda Agustí Juan, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert
  • Event: II European Geopolymer Network

• The Smart Takes from the Strong (2017)

  • Datum: 03.04.2017
  • Autoren: Mania Aghaei-Meibodi, Andrei Jipa, Mathias Bernhard, Prof. Benjamin Dillenburger
  • Event: Fabricate 2017

• Digital Concrete: Opportunities and Challenges (2017)

  • Datum: 01.01.2017
  • Autoren: Dr. Timothy Wangler, Ena Lloret, Nicolas Roussel, Mathias Bernhard, Dr. Lex Reiter, Prof. Dr. Norman Hack, Prof. Fabio Gramazio, Prof. Matthias Kohler, Prof. Benjamin Dillenburger, Prof. Dr. Jonas Buchli, Prof. Dr. Robert Flatt

• skelETHon Formwork: 3D Printed Plastic Formwork for Load-Bearing Concrete Structures (2017)

  • Datum: 01.01.2017
  • Autoren: Andrei Jipa, Nicolas Ruffray, Mathias Bernhard, Prof. Benjamin Dillenburger, Dr. Timothy Wangler, Prof. Dr. Robert Flatt
  • Event: XXI Congreso Internacional de la Sociedad Iberoamericana de Gráfica Digital (SIGraDi 2017)

• 3D-Printed Stay-in-Place Formwork for Topologically Optimized Concrete Slabs (2016)

  • Datum: 04.11.2016
  • Autoren: Andrei Jipa, Mathias Bernhard, Prof. Dr. Mania Aghaei Meibodi, Prof. Benjamin Dillenburger
  • Event: 2016 TxA Emerging Design + Technology Conference

• Design and Additive Manufacturing of Functionally Graded Lightweight Structural Elements Based on Multi-material Extrusion (2016)

  • Datum: 09.09.2016
  • Autoren: Dr. Hyunchul Kwon, Mania Aghaei Meibodi, Mathias Bernhard, Prof. Benjamin Dillenburger
  • Event: Advances in Architectural Geometry 2016

• Powder-Based 3D Printing for Building Components (2016)

  • Datum: 01.09.2016
  • Autoren: Andrei Jipa, Mathias Bernhard, Prof. Dr. Mania Aghaei Meibodi, Prof. Benjamin Dillenburger
  • Event: Advances in Architectural Geometry 2016 (AAG 2016)

Medienmitteilungen

• Construire en bambou et en impression 3D
• students at ETH zurich use digital fabrication methods to build bamboo pavilion
• Fast Complexity
• 3D-PRINTING HALVES CONCRETE USE IN CONSTRUCTION
• Swiss researchers develop method of printing complex structures with half the concrete
• Komplexe Sparsamkeit
• 'fast complexity' project employs 3D printing to make concrete use more efficient
• Ein Haus aus dem 3D-Drucker: Die Neuerfindung der Baubranche
• Dünnschalung aus dem 3D-Drucker
• A new show at Cooper Union bridges architectural research and fabrication
• Tanzende Säulen: Concrete Choreography von Studierenden der ETH Zürich

E-Mail

UQ.JUKY.UQLS@LYILH23YRRGP@

Externe URL(s)

• dbt