Role in the NCCR Digital Fabrication

Associated Investigator

Team members

• Dr. Alex Walzer: Social, Economic and Organisational Impacts of Adopting DFAB
• Pietro Odaglia: Inorganic Binderjet 3D Printing in Architecture
• Fabian Kastner
• Kaushal Deepshi: Fostering Implementation
• Dr. Vera Voney: Mix design for Powder Bed 3D Printing with Alternative Materials

NCCR publications

• Low Tech Waste 3D Printing (2022)

  • Date: 10.08.2022
  • Authors: Dr. Vera Voney, Filippo Schenker, Anastasija Komkova, Coralie Brumaud, Prof. Dr. Guillaume Habert
  • Event: 18th International Conference on Non-Conventional Materials and Technologies (NOCMAT 2022)
  • Notes: Conference lecture held on June 21, 2022.

• From casting to 3D printing geopolymers: A proof of concept (2021)

  • Date: 01.03.2021
  • Authors: Dr. Vera Voney, Pietro Odaglia, Coralie Brumaud, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert

• A data-driven parametric tool for under-specified LCA in the design phase (2020)

  • Date: 20.11.2020
  • Authors: Prof. Dr. Alexander Hollberg, Deepshi Kaushal, Saso Basic, Alina Galimshina, Prof. Dr. Guillaume Habert
  • Event: World Sustainable Built Environment Conference (BEYOND 2020)
  • Notes: Due to the Coronavirus (COVID-19) the conference was conducted virtually.

• Powder bed 3D printing with quarry waste (2020)

  • Date: 01.11.2020
  • Authors: Dr. Vera Voney, Pietro Odaglia, Filippo Schenker, Coralie Brumaud, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert
  • Event: World Sustainable Built Environment (BEYOND 2020) (virtual)
  • Notes: Due to the Coronavirus (COVID-19) the conference was conducted virtually.

• Evaluation of BIM-based LCA results for building design (2020)

  • Date: 01.01.2020
  • Authors: Prof. Dr. Alexander Hollberg, Gianluca Genova, Prof. Dr. Guillaume Habert

• Integrated BIM-Based LCA for the Entire Building Process Using an Existing Structure for Cost Estimation in the Swiss Context (2020)

  • Date: 01.01.2020
  • Authors: Anita Naneva, Dr. Marcella Bonanomi, Prof. Dr. Alexander Hollberg, Prof. Dr. Guillaume Habert, Prof. Dr. Daniel Hall

• Advances in Binder-Jet 3D Printing of Non-cementitious Materials (2020)

  • Date: 01.01.2020
  • Authors: Pietro Odaglia, Dr. Vera Voney, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert
  • Event: 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2020) (virtual)
  • Notes: Due to the Corona virus (COVID-19) the conference was conducted virtually.

• Geopolymer formulation for binder jet 3D printing (2020)

  • Date: 01.01.2020
  • Authors: Dr. Vera Voney, Pietro Odaglia, Coralie Brumaud, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert
  • Event: 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2020) (virtual)
  • Notes: Due to the Corona virus (COVID-19) the conference was conducted virtually.

• Top-down or bottom-up? – How environmental benchmarks can support the design process (2019)

  • Date: 15.04.2019
  • Authors: Prof. Dr. Alexander Hollberg, Thomas Lützkendorf, Prof. Dr. Guillaume Habert

• Powder Bed 3D Printing with Geopolymers (2019)

  • Date: 01.03.2019
  • Authors: Dr. Vera Voney, Pietro Odaglia, Dr. Gnanli Landrou, Coralie Brumaud, Dr. Andrei Jipa, Dr. Isolda Agustí Juan, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert
  • Event: 2nd RILEM Spring Convention & International Conference on Sustainable Materials, Systems and Structures (SMSS2019)

• Continuous BIM-based assessment of embodied environmental impacts throughout the design process (2019)

  • Date: 20.02.2019
  • Authors: Carmine Cavalliere, Prof. Dr. Guillaume Habert, Guido Raffaele Dell'Osso, Prof. Dr. Alexander Hollberg

• A design integrated parametric tool for real-time Life Cycle Assessment – Bombyx project (2019)

  • Date: 01.01.2019
  • Authors: Saso Basic, Prof. Dr. Alexander Hollberg, Alina Galimshina, Prof. Dr. Guillaume Habert
  • Event: Sustainable Built Environment Conference 2019 (SBE 2019)
  • Notes: Conference lecture held on September 13, 2019

• Digitalisierung als Chance für Nachhaltigkeit (2018)

  • Date: 01.11.2018
  • Authors: Dr. Isolda Agustí Juan, Prof. Dr. Alexander Hollberg, Dr. Vera Voney, Prof. Dr. Guillaume Habert

• Environmental assessment of multi-functional building elements constructed with digital fabrication techniques (2018)

  • Date: 01.11.2018
  • Authors: Dr. Isolda Agustí Juan, Dr. Andrei Jipa, Prof. Dr. Guillaume Habert
  • Notes: It was possible to publish this article open access thanks to a Swiss National Licence with the publisher.

• LCA benchmarks for decision-makers adapted to the early design stages of new buildings (2018)

  • Date: 10.10.2018
  • Authors: Prof. Dr. Alexander Hollberg, Pirmin Vogel, Prof. Dr. Guillaume Habert
  • Event: 6th International Symposium on Life-Cycle Civil Engineering (IALCCE 2018)

• Early-design integration of environmental criteria for digital fabrication (2018)

  • Date: 10.10.2018
  • Authors: Dr. Isolda Agustí Juan, Prof. Dr. Alexander Hollberg, Prof. Dr. Guillaume Habert
  • Event: 6th International Symposium on Life-Cycle Civil Engineering (IALCCE 2018)
  • Notes: Conference lecture held on 31 October 2018.

• Vision of 3D printing with concrete — Technical, economic and environmental potentials (2018)

  • Date: 01.10.2018
  • Authors: Geert De Schutter, Karel Lesage, Viktor Mechtcherine, Venkatesh N. Nerella, Prof. Dr. Guillaume Habert, Dr. Isolda Agustí Juan

• Productivity of digital fabrication in construction: Cost and time analysis of a robotically built wall (2018)

  • Date: 01.08.2018
  • Authors: Borja García de Soto, Dr. Isolda Agustí Juan, Jens Juri Hunhevicz, Samuel Joss, Dr. Konrad Graser, Prof. Dr. Guillaume Habert, Bryan T. Adey

• LCA and BIM: Visualization of environmental potentials in building construction at early design stages (2018)

  • Date: 01.08.2018
  • Authors: Martin Röck, Prof. Dr. Alexander Hollberg, Prof. Dr. Guillaume Habert, Alexander Passer

• Environmental design (2018)

  • Date: 01.05.2018
  • Authors: Prof. Dr. Alexander Hollberg, Linda Hildebrand, Prof. Dr. Guillaume Habert
  • Event: 6th eCAADe Regional International Symposium: Sustainable Computational Workflows (eCAADe RIS 2018)

• Rethinking the roles in the AEC industry to accommodate digital fabrication (2018)

  • Date: 01.01.2018
  • Authors: Borja García de Soto Lastra, Dr. Isolda Agustí Juan, Samuel Joss, Jens Juri Hunhevicz, Prof. Dr. Guillaume Habert, Bryan T. Adey
  • Event: 6th Creative Construction Conference 2018 (CCC 2018)

• Rethinking the roles in the AEC industry to accommodate digital fabrication (2018)

  • Date: 01.01.2018
  • Authors: Borja García de Soto Lastra, Dr. Isolda Agustí Juan, Samuel Joss, Jens Juri Hunhevicz, Prof. Dr. Guillaume Habert, Bryan T. Adey
  • Event: 6th Creative Construction Conference 2018 (CCC 2018)

• Design-Integrated LCA Using Early BIM (2018)

  • Date: 01.01.2018
  • Authors: Prof. Dr. Alexander Hollberg, Julia Tschetwertak, Sven Schneider, Prof. Dr. Guillaume Habert

• Geopolymers for inorganic binder in 3D printing application in construction (2017)

  • Date: 14.07.2017
  • Authors: Dr. Vera Voney, Dr. Gnanli Landrou, Dr. Andrei Jipa, Pietro Odaglia, Dr. Isolda Agustí Juan, Prof. Benjamin Dillenburger, Prof. Dr. Guillaume Habert
  • Event: II European Geopolymer Network

• Potential benefits of digital fabrication for complex structures: Environmental assessment of a robotically fabricated concrete wall (2017)

  • Date: 15.06.2017
  • Authors: Dr. Isolda Agustí Juan, Florian Müller, Prof. Dr. Norman Hack, Dr. Timothy Wangler, Prof. Dr. Guillaume Habert

• Environmental design guidelines for digital fabrication (2017)

  • Date: 20.01.2017
  • Authors: Dr. Isolda Agustí Juan, Prof. Dr. Guillaume Habert

• Integration of environmental criteria in early stages of digital fabrication (2017)

  • Date: 01.01.2017
  • Authors: Dr. Isolda Agustí Juan, Prof. Dr. Alexander Hollberg, Prof. Dr. Guillaume Habert
  • Event: 35th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2017)

• When Digital Fabrication Provides Environmental Benefits: Study of Complex Structures (2017)

  • Date: 01.01.2017
  • Authors: Dr. Isolda Agustí Juan, Prof. Dr. Guillaume Habert
  • Event: World Sustainable Built Environment Conference 2017 Hong Kong

• End-of-life consideration for hybrid material systems (2017)

  • Date: 01.01.2017
  • Authors: Dr. Isolda Agustí Juan, Sharon Zingg, Prof. Dr. Guillaume Habert
  • Event: XIVth International Conference on Durability of Building Materials and Components (DBMC)

• An Environmental Perspective on Digital Fabrication in Architecture and Construction (2016)

  • Date: 01.01.2016
  • Authors: Dr. Isolda Agustí Juan, Prof. Dr. Guillaume Habert
  • Event: 21st International Conference of the Association for Computer-Aided Architectural Design Research in Asia, CAADRIA 2016

• Environmental Implications and Opportunities of Digital Fabrication (2016)

  • Date: 01.01.2016
  • Authors: Dr. Isolda Agustí Juan, Prof. Dr. Guillaume Habert
  • Event: Sustainable Built Environment (SBE) Regional Conference (SBE 16)

Media impressions

• Ohne Beton wird es nicht gehen

Email

UQ.JUKY.IHS2.G2G@KLY2SU@

External URL(s)

• Sustainable Construction